Pay in installments of $5.77 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 2 - Jul 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
best herbicide for docks Grazon Pro Weed Killer Docks Nettles Thistles Brambles Safe to Grass Paddock 1ltGrazon Pro 1L MAPP 15785 Active Ingredients: 240 g litre triclopyr (acid equivalent) present as 334 g litre of triclopyr butotyl and 60 g litre (5. 5% w w) clopyralid. Spot treatment for docks, thistles and nettles. For use in grassland such as paddocks. To treat woody weeds in amenity grassland see: Blaster 1L A foliar acting herbicide for the control of perennial broad leaved weeds including nettles, docks, thistles and brambles, broom and gorse in
Grazon Pro 1L MAPP 15785
Active Ingredients:240 g/litre triclopyr (acid equivalent) present as 334 g/litre of triclopyr butotyl and 60 g/litre (5.5% w/w) clopyralid.
Spot treatment for docks, thistles and nettles. For use in grassland such as paddocks. To treat woody weeds in amenity grassland see: Blaster 1L
A foliar acting herbicide for the control of perennial broad-leaved weeds including nettles, docks, thistles and brambles, broom and gorse in established grassland. This product replaces the previously registered product Grazon 90.
Notes:
- Grass and weeds must be actively growing to ensure good weed control and minimal check to the grass. Do not spray in drought, very hot or very cold weather conditions.
- Only use GRAZON PRO on permanent pasture or on leys that have been established for at least 1 year.
- Do not apply the product where clover is an important constituent of the sward. Clover will be eradicated by an application of GRAZON PRO.
- Thoroughly clean the sprayer after use.
- DO NOT use any plant material treated with GRAZON PRO for composting or mulching.
- DO NOT use manure from animals fed on crops treated with GRAZON PRO for composting.
- Keep livestock out of treated areas for at least 7 days and until foliage of any poisonous weeds such as ragwort has died and become unpalatable. To allow maximum translocation of GRAZON PRO to the roots do not cut grass for 28 days after application.
Application Rates:
| Weeds | Rates Of Use (ml/100m2) | Optimum timing of application |
|---|---|---|
| Common Nettle | 12 | Spray when actively growing but preferably before flowering (normally up to mid June) |
| Dock (curled and broad-leaved) | 12 | Treat in the spring when the docks are in the rosette stage up to 25cm high. If the grass has been cut for hay or silage or grazed leave for 2-3 weeks to allow sufficient re-growth to occur before spraying. On large well established docks, or where there is a high reservoir of seed in the soil a second dose the following year may be required. |
| Creeping thistle | 12 | Spray when actively growing but before flowering spikes are 15cm high. For thistles beyond this stage the rate should be increased to 12 millilitres per 100m2. Applications of GRAZON PRO at flowering or during seeding is likely to produce reduced levels of control. If grass has been cut for hay or silage treat 2-3 weeks after cutting when sufficient regrowth has occurred. |
| Bramble, broom and gorse | 12 | Spray in June-August when actively growing but before plants begin to senesce in the autumn. It is essential that, particularly with large bushes, all the foliage is thoroughly wetted or incomplete kill may result. |
The timing of the application of GRAZON PRO herbicide is crucial. For good results the product must be applied to actively growing weeds.
Mixing: Half fill the knapsack with water and add required amount of GRAZON PRO mixing well. Use the spray immediately.
Spray Volume: For overall application GRAZON PRO should be used in a spray volume of 2 litres of water per 100m² to give good coverage of the weeds.
| Applicator | Coverage per 1ltr Bottle | Application Rate (Litres/Ha) |
|---|---|---|
| Knapsack sprayer | 8333m² | 1.2 litres per hectare in 200 litres of water |
Spray Quality: Apply as a MEDIUM quality spray as defined by the BCPC system.
Spot Treatment: On grassland where weed populations are too low to justify overall spraying, and around the farm, all the above weeds will be controlled by a spot treatment of 60 ml GRAZON PRO per 10 litres of water using a suitable lance from a knapsack. The weeds should be thoroughly wetted with the spray solution but spraying until "run-off" will decrease activity. The use of flood jets is recommended to prevent drift. Care should be taken to avoid local overdosing.
General Information:
- GRAZON PRO residues in plant tissues which have not completely decayed may affect succeeding susceptible crops.
- Do not use any plant material treated with GRAZON PRO for composting and mulching.
- Do not use manure from animals fed on crops treated with GRAZON PRO for composting.
- All conifers, particularly pine and larch, are very sensitive to spray drift. In hot conditions vapour drift may occur
- Avoid damage by drift onto susceptible crops or waterways. Do not apply directly to, or allow spray drift to come into contact with agricultural or horticultural crops, amenity plantings, gardens, ponds, lakes or watercourses.
YOU WILL ALSO RECEIVE A PAIR OF NITRILE GLOVES FOR SAFE HANDLING!!!!
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 536 reviews
Sort
Product Reviews
★★★★★ 5
Great product and worth the money.
Size: 4 Panel-88'', Color: Black
Portable and stable. Perfect size and gives me the privacy I need when working from home. Stability is great as long as you place the stands correctly it won't wobble. I love it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023